Regular price
$23,549.00 USD
Sale price
$23,549.00 USD
Regular price
Sold out
Our FlyingAg M350 RTK Pro Kit establishes a fresh standard for the industry. This cutting-edge drone platform introduces a brand-new video transmission system and control interface, an enhanced battery system for increased efficiency, and a broader array of safety features. Additionally, it boasts robust payload capacity and expandable capabilities. It stands fully equipped to infuse innovation and strength into any aerial mission.
Meet the FlyingAg M350 RTK
Ensure Steady Performance with the Latest Transmission System
Enhanced Control Interface
Prepared for Rugged Conditions
Seamless and Effective Command
DJI Pilot 2
The DJI Pilot 2 application has undergone enhanced optimization, presenting mission types and flight statuses with greater clarity. This streamlined control over both the drone and payloads promotes increased operational efficiency.
New Dual-Battery System
The Matrice 350 RTK comes furnished with an innovative TB65 dual-battery system. This system not only supports hot-swapping batteries but also enables multiple flights without requiring a power-off cycle. With the capability to endure up to 400 charging cycles, [3] it significantly diminishes the cost associated with each flight.
Next-Gen Intelligent Battery Station
The new BS65 Intelligent Battery Station provides a one-stop solution for battery charging, storage, and transport.
- Multiple Charging Modes
In Storage Mode, charge the battery to 50%, which is good for long-term storage. In Ready-to-Fly Mode, quickly charge multiple battery sets to 90% to start operation at any time and extend the battery life. - Intelligent Management
When the battery station is connected to DJI RC Plus, the DJI Pilot 2 app will display the battery status and health information. In addition, you can set the number of self-discharge days, update the firmware, export logs, and access other quick operations with one tap. - Effortless Transitions
The battery station is designed with 360°-movement wheels for more convenient transportation and transitions.
Intelligent Operation
High-Precision Mapping
Air-to-Ground Coordination
Automated Precision Inspection
CSM Radar (INCLUDED)
Optional Powerful Payloads[8]
The Matrice 350 RTK supports a single downward gimbal, dual downward gimbals, [11] and a single upward gimbal, [11] and can carry three payloads simultaneously. The aircraft also has an E-Port open interface and a max payload capacity of 2.7 kg, meeting the needs of different operation scenarios like public safety, inspection, and mapping.
Zenmuse H20: The tripple-sensor system of zoom camera, wide camera, and laser rangefinder works together, supplemented by advanced intelligent algorithms, to deliver outstanding sensing and imaging performance. (20 MP Sensor w/ 23x Optical Zoom Camera, 12 MP Wide Camera & 1200 meter LRF - laser range finder).
Zenmuse H20T ( Daylight Thermal): Capture everything. quad-sensor model with a wide-angle camera, a zoom camera, a laser rangefinder, and a radiometric thermal camera. An integrated laser rangefinder (LRF) measures the distance to an object at up to 1200 m away. (20 MP Sensor w/ 23x Optical Zoom Camera, 12 MP Wide Camera, 1200 meter LRF - laser range finder, 640x512 px Radiometric Thermal Camera).
Zenmuse H20N (Night Thermal): Integrates starlight sensors into its 20x optical zoom and night vision wide-angle cameras. Pair this with dual zoom thermal cameras (2x & 8x) and a 1200 meter laser rangefinder, and you have a versatile hybrid payload that rises to the occasion during night operations.
Zenmuse P1: Integrates a full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilized gimbal. Designed for photogrammetry flight missions, it takes efficiency and accuracy to a whole new level.
Zenmuse L2: lntegrates a Livox Lidar module, a high-accuracy IMU, and a mapping camera. When used with the flight platform, it forms a complete solution that gives you real-time 3D data throughout the day, efficiently capturing the details of complex structures and delivering highly accurate reconstructed models.
This web link below takes you to all the videos about using your new M350.
- Please check and strictly abide by local laws and regulations before flying.
- All data was tested with a production model Matrice 350 RTK in a controlled environment. Actual experience may vary depending on the environment, usage, and firmware version.
- All videos and images on this page were shot in strict compliance with relevant local laws and regulations.
- Before use, Matrice 350 RTK must be activated via the DJI Pilot 2 app.
- Measured with Matrice 350 RTK flying at approximately 8 m/s without payloads in a windless environment until the battery level reached 0%. Data is for reference only. Please pay attention to reminders in the app for the actual usage time.
- Measured in a controlled environment. The IP rating is not permanently effective and may decrease due to product wear and tear.
- Up to 400 cycles if the accumulative duration of battery level ≥ 90% is less than 120 days within 12 months.
- Measured with the 2112 High-Altitude Low-Noise Propellers and the takeoff weight ≤ 7.2 kg.
- Dual Operator Mode required.
- Measured with FCC compliance in an unobstructed environment with low interference at a flight altitude of approximately 120 m. Data is for reference only. During your flight, please pay attention to reminders in the app.
- There are certain blind areas of visual sensing and infrared sensing. Positioning and obstacle-sensing performance may be affected by the flight environment and obstacle characteristics. Please fly with caution.
- Sold separately.
- Please enable the radar obstacle avoidance function in the DJI Pilot 2 app and set the aircraft safety distance (> 2.5 m is recommended), and the flight speed should be < 10 m/s.
- Measured when the radar reflection cross-sectional area of the detection target is ≥ 0.4 m². The effective detection range may vary with the size and material of the obstacle.
- Gimbal connector is sold separately.
- This function requires the remote controller to connect to the Internet and download DEM files.
- This function requires Zenmuse P1.
- DJI FlightHub 2 required.
- This function requires the Zenmuse H20 Series payloads.
- The accessories in this section can also be used with the Matrice 300 RTK.
- Measured with CE compliance.
- The aircraft comes with E-Port, while SkyPort and X-Port components are sold separately.
Customer Reviews
Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
The Flying Ag M350 RTK kit truly raises the bar, and I'm thoroughly impressed. It's not just any drone; it's a leap forward with its brand-new video transmission technology and an intuitive controller. The battery life is great and the charging systems is the BEST, love the radar sensor, and it offers great flexibility with its payload and expansion possibilities. I'm particularly thankful that the kit was ready to go upon arrival. Right now, we're making the most of the P1 and L2 sensors, and it's been a game-changer for us.
Happy to answer any questions you might have, made this video.
